Posted on 61 Comments

How a Barefoot Running Blister Taught Me about Blister Prevention and Changed My Life

Getting a blister from barefoot running was the best thing that could have ever happened to me.

Let me back up and tell you the whole story so you can understand why.

On my second barefoot run ever, I was so fascinated by the sensations, and so transfixed by experimenting to see the effects of different stride patterns, that I didn’t even notice I had run 5k. Now that may not sound like much to you ultra-marathon guys, but I’m a sprinter. I’d never run more than a mile before!

About 20 minutes after the run, though, I noticed that I had a big blister on the ball of my left foot, under my 2nd toe.

It wasn’t lost on me that I only had a blister on one foot. And it was particularly interesting that it was my left foot, because most of the injuries I’d been getting (the ones that inspired me to try barefoot running, with the hope it would cure me), were in my left leg.

Clearly, I was doing something with my left leg that caused the blister, something I wasn’t doing with my right leg, which felt fine.

A week later, I went out for another barefoot run, well before the blister had fully healed. I thought that I’d experiment some more and see if I could run in a way that didn’t hurt, figuring that if I wasn’t in pain I wouldn’t be doing what caused the blister in the first place.

And, I figured, if I couldn’t find a way to run pain-free in about ten minutes, I’d just stop and try again when the blister was gone.

As a ran, I kept thinking, “How can I stop doing with my left leg what I’m already not doing with my right?” But no luck. For the first nine minutes of that run I was in pain. I couldn’t find a way to move my leg, or meet the ground, that didn’t hurt.

I put my attention on my good leg, my right leg, and wondered, “How can I just do THIS, whatever that is, with my left leg?”

About a minute later, something changed.

At the time, I didn’t know what it was, all I knew is that I was able to run without my left foot hurting. I wasn’t doing whatever it was that caused the blister in the first place.

And, simultaneously, I started running easier, faster, lighter and with less effort than I ever had. I finished the run (only about 3k this time, but still…) and felt fine.

That was the last time I’ve been injured from running.

What changed? Before I answer that question, let me first explain why blisters form in the first place. Understanding that will help the rest of what I say make more sense. It will also help you start to see how you can avoid blisters in your own running.

What Causes Blisters from Running, Anyway?

Running blisters are caused by excessive friction. They occur when your skin is being rubbed in a way that damages it. Your body’s response is to gather clear fluid underneath the skin that is being damaged to protect the underlying tissues. As you know, they are painful — especially if the blister pops, exposing the raw skin underneath.

When you are running in shoes, blisters can form any time your foot is sliding against your shoe. Obviously, a blister doesn’t form immediately. But when friction occurs from repeated rubbing of any part of your feet or toes inside your shoes, eventually you’re going to wind up with a painful blister.

Note that this can happen when running barefoot, too, as I experienced. The way your foot makes contact with the ground can also generate the kind of friction that leads to blisters.

Barefoot running blisters certainly aren’t necessary; nor are blisters when wearing running shoes. The key is to prevent the friction that causes them to form in the first place.

So how do we do that?

The Running Mistakes That Lead to Blisters

When runners get blisters, it is often because they are doing one or more of these three things:

  1. Overstriding (reaching out with their foot rather than placing it under — or closer to — their center of mass)
  2. Pulling their feet towards them (which, by the way, also puts strain on the hamstring)
  3. Pushing off with their feet using their toes (instead of placing their feet then lifting them off the ground)

When it came to my own blister, I discovered I was doing the first of these. More about that in a moment.

If you think about the mechanics of how blisters form, you can see the problem here with all three.

Let’s dive into each with a bit more detail to help you avoid blisters in the future.

Reaching out with your feet:

When you land with your foot too far in front of your body you’ll be applying braking force on your feet every time they hit the ground. In other words, as your foot hits, the momentum of your body wants to continue forward but your foot is pushing back against it.

Exactly what happens next depends upon what you’re wearing. If you have nothing on your feet, your skin is likely to grip the ground, preventing it from sliding. This means stress on your tissues as lower layers essentially tug against the upper layer of your skin.

If, on the other hand, you overstride while wearing a running shoe, your foot is probably going to slide within the shoe as the shoe’s sole grips the ground securely.

Whichever happens, this repetitive rubbing can generate blisters. The location will vary, however, depending upon your foot strike pattern. If you land heel first, you’re likely going to get blisters on your heels. (By the way, landing on your heels is a bad idea for other reasons, too. It creates significant impact forces that are hard on your joints and tissues.)

If you land mid-foot or toward the front of your foot, you’re going to see blisters on the balls of your feet. This is what I was doing since, as a sprinter, I wanted to land on the ball of my foot.

The solution to this blister-causing stride pattern is landing your steps closer to under your body.

Pulling your feet

Many runners can fall into this habit because it feels like a way to gain more speed – to essentially pull your body forward with your foot against the ground. The result is just like what happens when you land with your feet too far out in front of you, only this time the direction of the rubbing is the opposite. You still end up with increased friction on the bottom of your foot and the resulting blisters.

If you stop overstriding, and land with your foot under your body, you’re less likely to pull your foot when it’s on the ground, reducing the chances of developing this type of blister.

Pushing off

This is similar to pulling with the foot, though here it isn’t pulling with a foot out in front of me but trying to give an extra push forward with a foot beneath or behind me, by flexing your toes, or what some call “toe-ing off.”

You can probably see how this puts horizontal pressure on the toes, creating more friction.

The correct motion simply involves lifting (not pushing) your foot off the ground by flexing your hip.

In other words, imagine that you step on a bee… you wouldn’t push off the ground since that would drive the stinger further into your foot. Instead, you would reflexively flex your hip, which lifts your foot off the ground.

To prevent a pushing-off blister, you want to think about lifting the foot rather than pushing off.

I could summarize all three of these things by saying you should try to run in such a way that minimizes horizontal forces applied to the bottoms of your feet. Your feet should come and go down without braking, pushing, pulling, or sliding. If you want to prevent blisters, you need to learn to run in a way that minimizes friction.

Can Barefoot Running Help Prevent Blisters?

I began by telling my own story about getting a blister when I started experimenting with barefoot running. While I’m not suggesting you run barefoot, it was certainly life changing for me.

One of the best things about barefoot running is that when you are doing something wrong in your form, it hurts. In contrast, correct form feels great. So you learn right away to listen to the feedback your body is giving you and to make adjustments.

All of the padding and support in traditional running shoes actually prevent you from really feeling what’s going on.

With barefoot running, you become attuned to the effects of your form and can use that input to coach yourself to become a better runner. It’s an ongoing process of continual improvement. I believe a better form is going to be better for your body in every way, including reducing the chances of getting blisters.

But What about Barefoot Shoes?

Given what I’ve said about running barefoot, you might be wondering what I’d say about barefoot shoes (after all, I did start Xero Shoes). Do they give any advantages when it comes to blister prevention?

One of the reasons for blisters is the foot rubbing that comes from the way you’re running, as we discussed above. Another reason many runners get blisters, however, is because of the shoes they are wearing. If your shoes don’t fit properly or move properly with your foot, you are going to have issues.

Think about it. Your feet have many bones, joints, and muscles that are designed to move as you walk or run. They are not solid, immovable objects. That means your shoes need to be able to move with your feet to reduce or eliminate friction.

Traditional running shoes fall short in this area. They are too stiff to flex naturally and usually too cramped in the toe box to allow your toes to move freely. Instead, they end up rubbing against the sides of the shoe, or against each other, both of which can be blister-causing. A still heel can also lead to blisters on the Achilles.

Barefoot running shoes are designed with a thin, flexible sole and a roomy, foot-shaped toe box. This kind of shoe is going to do three things for you. First, it is going to allow you to maintain that ground feel I was talking about earlier. You’ll be able to listen to the feedback your body gives you to hone in on your ideal form. Second, barefoot shoes will move with your feet, helping to prevent blisters. And third, the wider toe box can keep your toes from rubbing against each other.

People sometimes think it is inevitable that new running shoes will hurt your feet. This just isn’t true. New shoes that actually move with your feet and have enough room for your toes can feel great from day one.

Other Tips to Prevent Blisters

Your shoes and your form are probably the most important things to pay attention to if you want to prevent blisters. There are two other things that can be helpful to keep in mind, however:

  • Moisture: Moisture is your enemy when it comes to blisters. As surprising as it might sound, moisture increases friction and can also make your skin more susceptible to damage. If you need to, you can use talcum powder (like baby powder) to help absorb moisture.
  • Running Socks: Socks are a useful way to control moisture when you run wearing shoes. We could get into a big discussion about which are the right socks (Cotton socks? Wool? Double-layer socks?), but I’ll save that for another time. Running socks are usually specially designed to wick away moisture. If you do choose to wear socks to help keep your feet dry and reduce friction, look for the thinnest socks you can find to preserve as much as possible the natural feedback we’ve talked about above.
  • Moderation: Even in the best of circumstances, your skin can only take so much, especially when you are getting started or beginning to push to longer distances. Runners sometimes resort to extra tricks like applying duct tape or an anti-chafing balm when they know they’ll be dealing with tiredness and their form breaking down at the end of a longer-than-usual run. I get it; sometimes you feel like you need to be out there, even despite your blisters. In general, though I think it’s best to take it slowly and, again, listen to your body.

To summarize, run in a way that minimizes friction on your feet, stay away from ill-fitting shoes that don’t let your feet move naturally, keep your feet dry, and be prepared to listen when your body is telling you to stop or slow down. If you do get them, treat blisters and take some time off so your body can heal.

It’s no fun to get foot blisters. But my first barefoot running blister was the best thing that ever happened to me as a runner. It taught me to listen to my body and I’ve become a much better runner for it.

The content of this post does not constitute and is not intended to be a substitute for professional medical advice, diagnosis or treatment. Always seek the advice of a physician or other qualified health provider with any questions or concerns you may have about your health or a medical condition.

Posted on 1 Comment

Hey Barefooters: do you have Shoeguiltitis? We have your cure.

Oh, the joys of being barefoot. We will all be able to look back and think of this time as “the enlightenment” when we finally ditched our constrictive foot coffins and let our toes emerge, shaking and crooked, to see the light and heal. The more you adjust to ditching the shoes, the more you find yourself heading out shodless or in something minimal (not everyone wants to get kicked out of a restaurant or pay attention to every shard on the street).  Unfortunately, this pedal liberation does have its costs. You may now find yourself struck with a case of shoeguiltitis (SHOO-gilt-ite-iss).

The Problem:

This affliction generally creeps on slowly, but as you embrace your barefoot life more fully, you may quickly and unknowingly find yourself in its grips. Do you avoid looking at the piles of shoes in your closet? Do you find yourself making negotiations when passing the shoe rack? Oh, I will wear them next week. But next week never comes. Do you feel regret and see $$$ signs oscillating through the air when confronted with your shoe collection? Do you suppress a strong urge to hurl all of your shoes out the window and into the nearest dumpster? Then feel the inevitable guilt for the landfill waste you would be contributing to as well as the hundreds of wasted dollars spent? Do you feel the urge to run with your old shoes only so you can get your “money’s worth” and use them until they are “done”? If you have answered yes to one or more of these questions, you have Shoeguiltitis.

The Solution:

Fear not, my barefoot amigos! While you have moved on from your raised-heel, toe-spring, arch-supportive motion-control running  shoes, there are others that will find hope and safety in your shoes. Soles4Souls can take your old shoes, clean them up, and donate them to those in need. I know what you’re thinking – why would I want to give someone else the very shoes that had me feet up with two bags of frozen peas on my knees? Here’s why: in other countries where clean water isn’t as plentiful and infectious disease isn’t as easily controlled, there are children and adults who can protect themselves from sickness and disease by wearing shoes. For others, they may have access to clean water, but may have lost everything they own due to devastating circumstances. You can make a difference.

Soles4Souls was founded on the mission to “change the world, one pair [of shoes] at a time.” After seeing the devastation of the 2004 tsunami in Asia and later damage inflicted by Hurricane Katrina, CEO Wayne Elsey felt compelled to do something. When television coverage aired a single shoe washing up on a beach, he knew he had found his calling. From there S4S was formed and has since donated well over 14 million pairs of shoes to 127 countries including Kenya, Thailand, Nepal and the United States. Every 7 seconds, a pair of shoes is placed into the hands of someone in need. Soles4Souls is a 501(c)(3) organization recognized by the IRS and donating parties are eligible for tax advantages.

How to Donate: Follow this link and find a drop-off location nearest you.

Learn More: www.soles4souls.org

 

Take a few minutes and cure your Shoeguiltitis just in time for the summer sunshine.

 

Feel the World!

The content of this post does not constitute and is not intended to be a substitute for professional medical advice, diagnosis or treatment. Always seek the advice of a physician or other qualified health provider with any questions or concerns you may have about your health or a medical condition.

Posted on Leave a comment

Phil Maffetone On Xero Shoes Barefoot Sandals

can we run a 1:59 marathon?

I don’t get starstruck, but I do get excited when I meet someone who’s work I’ve admired and appreciated for years. And Phil Maffetone is one of those people.

I got my copy of Phil’s book In Fitness and In Health in 1997 and, way back then (even earlier, really), he advocated minimalism and barefoot running. Reading his books almost made me want to switch from sprinting to marathons.

So, I was thrilled when Phil responded to my email asking if he wanted to try a pair of Xero Shoes, even more thrilled when he said yes, and ecstatic to read his review on Zero-Drop back in the day.

It starts with a sentence that could put a chill in the heart of any shoe maker:

I don’t like writing shoe reviews, because I don’t like many shoes.

But it happily and quickly leads to something we’ve heard from thousands of customers:

I slipped them on — easy enough. I walked, jumped, and ran. It was an all around pleasant surprise.

Phil is smart enough not to overdo it in a new pair of shoes, but like many who enjoy the feeling of being able to Feel The World, he couldn’t help himself and went out for a 20 minute spin.

If you don’t know Phil, you have got to check out his writing (and his music!). A true pioneer in the fitness, running and health world.

Thanks, Phil!

Posted on 11 Comments

Xero Shoes barefoot running sandal outsole — FeelTrue™ 4mm Connect and 6mm Contact

A major advance for barefoot sandals

 

We are extremely proud to introduce you to the only outsole specifically designed for barefoot running, our FeelTrue™ outsoles! Here is our CEO, Steven Sashen, describing it himself, back when we were still called InvisibleShoe!

Click Here to order our DIY FeelTrue Rubber Sandal Kit
 

With the help of one of the world’s top outsole manufacturers, and former lead designers from Nike and Reebok, we started with the famous Vibram Cherry material (that we’ve been happily offering since November 2009) and made these huge improvements with our DIY FeelTrue Rubber Sandal Kit:

  • Contoured to fit your foot, without providing unnecessary support
  • “High-abrasion” material lasts a long time
  • Very flexible (great barefoot feel) while still providing strong protection
  • Holds it shape better
  • Slight “toe spring” keeps the sole closer to your foot
  • Sized for feet from 5″ to 15″ long — many people can use the outsole without trimming! (and there’s less waste if you do)
  • Elegant shape with subtle arch and heel cup
  • Easily customized with just a pair of kitchen scissors
  • Topsole pattern feels soft while providing traction
  • Reinforced, extended, and elevated ankle holes keep lace from wearing out
  • Dual-Chevron tread pattern provides traction under any condition
  • Material includes some recycled stock

There are two models of our FeelTrue™ outsole:

  1. 4mm thick Connect — the closest thing to barefoot. Extremely light weight (men’s US size 9 weighs ~3.7 ounces)
  2. 6mm thick Contact — still a great barefoot feel, but with more protection. Slightly stiffer, but still flexible. (men’s size 9 weighs ~ 5.3 ounces)

Whether you walk, run, hike, or use your Xero Shoes for anything else, we can’t wait for you to try Connect and Contact and let us know how much you enjoy being able to Feel The World™.

Click Here to order our DIY FeelTrue Rubber Sandal Kit!