Posted on 10 Comments

Huarache Running Sandals of the Tarahumara – Kits and Custom huaraches

Okay, so the big question is, “WHY use huarache, the Tarahumara running sandals?”

The answer is pretty obvious, but there are some important-yet-surprising pieces to the puzzle.

The obvious answer about huarache is: It’s the closest thing there is to barefoot running, without some of the hazards of barefoot running. Namely, you’re adding a layer of protection to your feet that bare skin simply can’t give you, no matter how well conditioned your feet are.

Especially with the 4mm Vibram Cherry sole material we use in our huarache kits and custom huaraches, you get what I like to call “better-than-barefoot.” The soles are so flexible it’s like having nothing on, so light, you barely notice them… except it’s blissfully clear that you’re not getting scraped up, cut up, scratched up and dirty like you would if it was just your tootsies on the ground.

That said, I’m not going to say “Don’t run barefoot and run with huarache running sandals instead!”

Why not?

Well, because running barefoot gives you more feedback than running with ANYTHING on your feet.

If you want to know how efficient your form is, go barefoot and you’ll know (that is, if it hurts, you need to change something!).

If you want to know if you could be running lighter or easier, go barefoot and you’ll find out (did I mention: if it hurts, you need to change something?).

Conversely, putting ANYTHING on your feet, including huarache sandals, can mask some improper technique, give you the illusion that you’re better than you are and, possibly, lead to overtraining. Especially at first.

That said, since it takes awhile to develop that new barefoot running technique, and since it takes a while for your feet to get conditioned (btw, they do NOT get calloused), I recommend a mix of barefoot and huarache running.

In fact, what I often do is carry my huaraches with me when I go out barefooting. And if my feet start to get a bit sore, and I’m still a ways away from home, I’ll slip on my huaraches for the 2nd half of the run.

Or, I’ll warm up in my huaraches, and then slip ’em off (using the method of how to tie huarache sandals here), and take off from there.

Oh, if I’m on serious trails — and by serious, I mean a lot of rocks, twigs, etc. — then it’s all huarache, all the time.

Posted on 129 Comments

Barefoot Running is Bad For You!

Ever since Chris McDoguall’s book, Born to Run, became popular (interestingly, long after it came out), the debate about barefoot running has become heated.

There was no big argument when Zola Budd ran barefoot, or when Abebe Bikila won the marathon without shoes, or when Ron Hill competed in the Mexico City Olympics in “the lightest shoes I could find.”

But once “regular folk” started kicking off their kicks, it’s become a rhetorical battlefield out there — the converts touting the great benefits of barefoot running, and the critics assuring everyone that taking off your running shoes is akin to playing Russian Roulette.

Then the Harvard study came out, showing that when you run barefoot, you adjust your stride to put less stress on your body. And, right on the heels of it (pun intended), came editorials about how running barefoot is the worst thing you could do… though, most of those editorials came from people who own or work for shoe companies or shoe sellers. Continue reading Barefoot Running is Bad For You!

Posted on Leave a comment

Best Barefoot Running Shoes, you say?

What makes Xero Shoes the best barefoot running shoes?

We were invited to show our previously named Invisible Shoes running sandals (well, walking, hiking, working out, hanging out, too) on television. So we asked some of our customers who liked the idea of being on TV if they would submit a short “Why I like Invisible Shoes” video that we could use.

Kate sent in this video, and I think she sums it up pretty good at the end 😉

Here’s to the all the 50+ white (or other colored) haired people who are cooler than their college aged cohorts when they’re in their “Invisible Shoes”. Cheers! 😉

Posted on 4 Comments

Barefoot Running Sandals vs. Running Shoes

A barefoot running vs. running shoes “infographic”

I’m get all geeky over well-presented information, and the graphic about barefoot running and regular running shoes from XRayTechnicianSchoools.net is a pleasure.

Whenever someone says to me “Barefoot running can cause injuries” I remind them of the fact in 1/3 of the infographic: 90% (I heard 80%) of marathoners get injured each year.

When people ask me about wearing barefoot running shoes in the winter, I remind them of that big squiggly time line showing that for hundreds of thousands of years, we would walk and run barefoot, without shoes, in some pretty cold places (in other words, your body, given time, will acclimate).

And, I agree that being barefoot is not appropriate all the time… like when you want to get into a restaurant. Hence the value of our high-tech upgrade on the Tarahumara huarache-inspired shoes and sandals, where you still get a great barefoot feel, but can get into restaurants.

I also got a great flashback from the 1974 timeline: I vividly remember getting my first pair of Nike Waffle Trainers. What’s funny is that most people remember that it allowed you to land on your heel. I remember that it had such a large amount of “toe spring” (a curve up from the ball of your foot to your toes) that it kept me on my toes! (I was, and still am, a sprinter, so I don’t spend much time running on my heels).

AMAZING to see that barefoot running shoes are a $1.7 billion industry, in part because the market has grown MUCH faster than anyone imagined it would. But also because most of the barefoot running shoes are SO expensive. Minimalist shoes clearly doesn’t mean minimalist prices, it seems 😉

And, of course, I agree about the best way to start barefoot running (there’s no rush to make the transition out of running shoes and over to barefoot)

Free Your Feet
Created by: X Ray Technician Schools

The content of this post does not constitute and is not intended to be a substitute for professional medical advice, diagnosis or treatment. Always seek the advice of a physician or other qualified health provider with any questions or concerns you may have about your health or a medical condition.

Posted on Leave a comment

How Barefoot is Barefoot, Really?

Okay, Pop Quiz time:

Which of the following fictitious barefoot running shoes gives you more of a barefoot feel:

a.) ASICs  Nuttin’-2C with a 10mm thick sole
b.) Brooks Zilch-City with a 1mm thick sole

If you answered B, you’re mistaken.

But if you answered A, you’re also wrong.

Yes, my apologies, but this was a trick question.

In the barefoot/minimalist footwear world, there are several  concepts buzzing around, ideas upon which runners make buying decisions, that are potentially red herrings. In other words, these concepts can be used to inform or mislead, depending on how they’re used and how much other information comes along for the ride.

And “sole thickness” is a biggie.

If you look at ads for various minimalist and barefoot footwear products, sole thickness is highlighted.  Sometimes bragged about. Thinner soles, some believe, are inherently better than thicker. Unless you’re a trail runner, then slightly thicker is better. Confused yet?

You should be. Because, it’s not that simple.

Let’s go back to my trick question.. The reason neither answer is correct is that I didn’t tell you what the soles are made of.

If the 10mm sole was made of cotton candy, you may as well be running on the ground.

But if the 1mm sole was made stainless steel, or carbon nanotubes, you wouldn’t be able to tell if you were on the ground at all.

I’m exaggerating for effect — both comic and practical. But looking out in the market, you’ll see sole thickness used as a seeming shorthand for “barefootedness.” In other words,  “thinner” means closer to barefoot.

I recently had an Xero Shoes customer call me and tell me about his particular brand of minimalist shoe and how it advertised a 3mm sole. He wanted to know whether I thought his shoe was “more barefoot” than our 4mm Connect barefoot sandal.

“Great,” I said, knowing the shoe in question. “It’s only 3mm thick. But is it flexible? Can you roll it into a tube?”

“Well, no,” he said, clearly trying. “It’s pretty rigid.”

“And if you put on that shoe and you stepped on a nail, how similar would  that feel to stepping on it barefoot? Wait!” I added, hoping I wasn’t too late to avoid a lawsuit, “Don’t actually step on a nail to check!”

I continued, “If you look inside that shoe, can you see the extra 2-3mm of insole padding they added to the 3mm outer sole?”

“Uh-huh.”

I could hear in his voice the first stages of someone starting to see through the fog of marketing hype.

Many shoe marketers suggest, and many minimalist shoe buyers believe, that sole thickness is equivalent to “barefoot feel.” It’s not. It’s more complicated than that.

When it comes to minimalist shoes, I feel compelled to paraphrase a line than no man wants to hear from a woman, “Honey, thickness isn’t everything.”

Posted on 13 Comments

The little lie of barefoot running

As the barefoot running boom continues to explode, it’s important that we debunk the mythology that’s sprung up and face some facts. And perhaps the most obvious fact is this:

If you run with anything between your skin and the ground, you are not barefoot runner.

Let me say that again. If you wear Vibram Fivefingers, New Balance Minimus, Merrell Trail Gloves, Altra Adams, Vivobarefoot shoes, Newtons, Inov8 shoes, even our Invisible Shoes huaraches running sandals, you are not a barefoot runner.

I don’t care if your previous shoes were padded stilts and your new shoes are a “zero-drop” natural movement minimalist shoe, if you’ve got something on your feet you’re not barefoot running.

Barefoot running means that you run in bare feet. Period.

Now, don’t get me wrong, I’m not saying that if you’ve just spent $125 on your Vibram Bikilas you need to throw them away, or that if there’s a barefoot running Meetup you can’t be part of the cool clique. And I’m not saying everyone needs to be barefoot. And, clearly, I’m not saying “don’t buy Xero Shoes” 😉

But it’s important that we differentiate actual barefoot running from minimalist running.

Why?

Because more often than some would like to admit, barefoot running and minimalist running do not produce the same results.

The promise of barefoot running is that the sensations you get when your skin contacts the ground — often known as pain — teach you proper running form. That is, if you change your form to make the pain go away, you’ll have a more efficient, lighter, easier stride, and you’ll be able to run pain-free for life.

Anything that you put on your feet reduces the amount of sensation you feel and can interfere with the feedback loop that barefoot running gives which produces those benefits.

Again, I’m not saying that you don’t get feedback from minimalist shoes. You certainly get more than you do when you’ve got 2″ of padding in your  Nike I Can’t Feel The Grounds. As the developer of Xero Shoes, I know hundreds of people who switched to our sandals, improved their running  form, eliminated life-long aches and pains, and now enjoy running ultra-marathons. As one of our early customers put it, “Xero Shoes are just like being barefoot… if they covered the world in a thin layer of comfortable rubber.”

But, I’ve also met a LOT people who bought a pair of Vibrams or Merrells (or any other minimalist shoe), soon became injured, and now tell everyone they know that “barefoot running” is dangerous… and they’ve never run barefoot!

I’ve been on a number of barefoot running panel discussions and, inevitably, there will be some number of doctors, physical therapists, podiatrists and other medical professionals who say, smugly, “Hey, stick with this barefoot running thing. All the people getting hurt by doing it are putting my kids through college!”

Before they can finish chuckling, I fire back:

Me: “You know, of course, that all you guys made the exact same joke 40 years ago when running shoes were invented, right? And you know that people who have no problems running barefoot — and ones who get cured of injuries by running barefoot — will not come to see you, right?”

Them: “Uh…”

Then I pull out the bigger guns: “And when a patient tells you they got hurt from barefoot running, did you ask if they were actually in bare feet? Did you check to see if they simply over-trained by doing too much, too soon? And, maybe most importantly, did you take a video of them running so you could analyze their form and see if they were simply using the same injury-producing mechanics they used when they wore shoes? Or did you see if they were trying to stay on their toes, putting extra strain on their calves and Achilles, because they have a mistaken ideas about proper barefoot form?”

Them: “Uh…”

Barefoot running is more than switching to a minimalist shoe. And it’s more than simply removing your shoes. Don’t believe me? Go to a barefoot running event, find the people in their minimalist shoes, and see which ones are still landing on their heels, as if they’re still in motion controlled running shoes.

In fact, be on the lookout for runners who are actually barefoot doing the same thing! Some of us are either unable to feel those important form-changing sensations, or unable (without coaching) to actually make form changes in order to find a painless way of moving.

For an example of this, check out Pete Larson’s video of the recent NYC Barefoot Run. Most of the VFF wearers, and a handful of barefoot runners are still landing on their heels. (I was there and noticed the same thing, but I didn’t have the brains to video tape it… so, Thanks, Pete!)

Let’s wrap this up with a wish: If you’re one of those “barefoot” runners who has never run barefoot, I can’t encourage you enough to try it. Don’t think there’s some transition you need to go through before you’re “ready.” Ironically, the best advice I can give you is: Just Do It!

Get on a good clean hard surface (a bike path is great, streets work too) and go for a run. Listen to your feet, if they hurt, try to move in some different way so that they don’t. And if you can’t figure out how, then stop and try again another day. Don’t think you need to build up callouses; none of us who successfully run barefoot have any (they’re another sign that you’re doing something wrong). If you can find a coach or some training, get some guidance.

Report back here with what you discover.

The goal is not to be barefoot all the time. The goal is to be flexible. To be able to run comfortably, easily, and enjoyably under any circumstance. To know when barefoot is the best option and when something under your feet is called for. I wear my Xero Shoes for all my walking, hiking, and getting into restaurants. I’m barefoot for a lot of my sprinting training. But, hey, I still wear running shoes, too… when I have to shovel a 2′ Colorado snowfall.

The content of this post does not constitute and is not intended to be a substitute for professional medical advice, diagnosis or treatment. Always seek the advice of a physician or other qualified health provider with any questions or concerns you may have about your health or a medical condition.

Posted on 1 Comment

Jordan Flowers’ reviews Xero Shoes and…

Jordan Flowers just posted his review of Xero Shoes (formerly Invisible Shoes) and often mentions “other huaraches”, without mentioning names… but it’s kind of obvious who the comparison is to if you’ve been looking at huaraches.

I must say that I’m thrilled to see someone independently discovering what we’ve been saying for 2 years 😉

Enjoy his review of Xero Shoes here.

Posted on 2 Comments

5 Common Stride Missteps

Let us guess, you ditched the cushioned clodhoppers only to find a new host of issues to deal with. Blisters on the bottom of your feet? Sore hips? Calves aching so much you can’t walk? Soak in some Epsom Salt and give yourself a break. No one said changing a lifetime of running habits overnight would be easy. No matter what shoe (or lack thereof) you wear, if you don’t change your stride, it won’t matter.  Not sure if you’re “doing it right?” Below are five common missteps to set your stride straight.

Misstep #1 Incorrect Stride Rate

When it comes to running, we get into a groove and find a familiar, comfortable place. We expect things to feel a certain way. Traditionally, runners trod along at roughly 120 steps per minute. With a forefoot or mid-foot stride, you need to speed up your stride rate and shorten your steps to roughly 180 steps per minute. Initially, it will feel very strange and awkward, and you may need to do some game time internal persuasion to stay consistent. Stick with it and you will be surprised how quickly you become accustomed to your new stride (and the pain-free knees that accompany). Remember, forefoot/mid-foot striding in a minimalist shoe requires stronger calves, Achilles, tendons, ligaments and bones – you will slow down initially, but as you strengthen so does your speed. Take your time and slowly work your mileage up.

Misstep # 2 Over-striding

Over-striding jars the body and puts unnecessary strain on your ankles, knees and back. Watch your feet closely as you run. Do your feet land under your center of mass where they should or in front of your body? The closer they are to you, the better. It is also common for runners to kick their legs out in front, then land lightly on the forefoot, rather than keeping a normal stride. Think of it as a modest can can dance in running form. Why add the extra stride and expend extra energy without the payoff?  Keep your stride short and land under your center of mass.

Misstep #3 Pushing/Pulling Your Stride

Are you taking off for a run only to find a nasty blister swelling on the ball of your foot afterwards? When you push off for your stride, or pull your foot back towards your body to complete your stride, you’re smearing your foot across the ground. All of that extra friction is sure to create an uncomfortable blister or two. Keep your stride light and eliminate the foot smear and you will quickly find your blisters long gone.

Misstep #4 Incorrect Placing and Lifting of the Feet

Are you jamming your foot to the ground and using a heavy stride? Going lighter and minimalist not only includes your shoe but your stride as well. When you run, imagine you are sneaking up on an elk in the woods or running on hot coals. Place your forefoot or mid-foot on the ground, then quickly lift it back up. The faster you move, the better.  Doing this will keep your stride light, fast, and put less strain on your body.

Misstep #5 Asymmetry

Have you experienced a blister or soreness on one foot, but not the other? Pain in only one shoulder? Stronger strain in the right Achilles but not the left? Your symmetry is off. This is easy to do but also easy to fix. If you consciously try to have your feet, legs and arms move symmetrically in the same way, you will find most of your problems cease immediately. This becomes more crucial at the end of the run when you are fatigued and your stride isn’t as precise, your arms aren’t as stiff. Strive to keep yourself strong and symmetrical to the last step.

Of course, there is the granddaddy of all missteps – the heel strike. We hope that no one is shedding their shoes only to pound their heels into the pavement (ouch!) Be sure to take on a forefoot or mid-foot stride and let your heel gently touch the ground as you roll through your step.

Have you done any of these? We know we have! If you’ve overcome any stride challenges, do share. Your experiences may help someone else out there.

Feel the World!

The content of this post does not constitute and is not intended to be a substitute for professional medical advice, diagnosis or treatment. Always seek the advice of a physician or other qualified health provider with any questions or concerns you may have about your health or a medical condition.

Posted on 34 Comments

How NOT to start barefoot running

I was on a panel discussion about barefoot running a while back. At one point, someone in the audience asked,

So how do I transition to barefoot running?

  • NOTE — even if you’re not a runner, this story is still relevant and important for you… okay, back to the story…

Before I could respond, a well-respected physical therapist suggested the following:

“First, switch to a slightly lower-heeled shoe than what you have. Run in that for a few months. Then switch to a racing flat, maybe one day a week for a while… then add an extra day every month, until you can run in those. Then maybe try something like Vibrams on a soft surface, like grass in a park. Work up to being able to run on the grass… then try a soft dirt path. Eventually you may be able to run on hard surfaces, but don’t do that too often. And I don’t recommend being totally barefoot because you could step on something.”

The only reason I didn’t interrupt him was that I was in shock!

I had never heard anything so insane in my life. Until he he tossed out his next bit of barefoot running advice:

“Expect to spend about 2 to 3 years making the transition. That’s how long I’ve been doing it and I’m still not there.”

That’s when my shock gave way to action, and I took off the politeness gloves.

“Hold on,” I said, “this is completely upside down and wrong!”

Danny Abshire from Newton jumped in as well, “Right, that’s backwards.”

I’ll tell you what Danny and I proposed, instead, in just a moment. But first, let’s back up to the question that started it all.

“How do you transition!?”

The idea built into the question itself seems to make sense. If you’re wearing a motion-controlled shoe with a 3″ heel and a $400 orthotic, it seems logical that you need to slowly wean yourself from all that support. It seems clear that you would need to get comfortable in a lower and lower heel until you’re ready for barefoot.

But as we’ve already seen in the previous days of this course, things are not always as they seem.

Here’s the bottom line:

There is nothing that “prepares” you for being barefoot.

Nothing.

Not “zero-drop” shoes (where your heel is at the same height as the ball of your foot). Not Vibrams. Not a thinner insole. Not even Xero Shoes (more about those in a second).

Anything that you put on your feet will change either your stride and biomechanics, or the amount of sensation you’re feeling in your feet (or both) compared to being barefoot. So once you take off your shoes, or fully feel the ground, you’ll need to learn to move differently.

Here’s where some people stop reading what I’m saying and respond with two arguments (to points I’m not making).

First, they’ll say, “Oh, so you’re some sort of barefoot purist! Who are you to tell me what to wear or not wear?”

To be clear, I’m not telling anyone what to wear and I’m not saying barefoot is the only way to be. Admittedly, the majority of my time I am in Xero Shoes, but not always (more about when I’m not, and when you shouldn’t be in an upcoming lesson).

This article is about the myth of “transitioning”, not about your footwear, or lack thereof.

Secondly, people will say, “Yes, but switching to a racing flat or zero-drop shoe will give your Achilles time to stretch and strengthen, and that better prepares you for being barefoot.”

To them I say, “Not always. And for almost everyone, your Achilles has more than enough stretch. And, even if it were true that you needed to stretch your Achilles, there’s a better way than spending 2-3 years to make that happen.”

Keep in mind that the biggest reason for going totally barefoot is that feeling the ground with your skin gives you the most feedback about your form. Feedback that, if you attend to it, can inspire you to change your gait to something more efficient, easy, and natural. Running in Xero Shoes is, really, the same… if they covered everywhere you stepped in 4-6mm of flexible rubber.

All the other shoes I’ve tested reduce the amount of ground sensation you feel so that you don’t get the feedback you need to adjust your gait.

I’ve seen hundreds of people in VFFs or racing flats who still heel strike or have some other gait pattern where they aren’t getting much if any extra “Achilles strengthening and stretching”.

So, what’s the better way to “transition” that Danny and I chimed in with?

  1. Take off your shoes (or put on your Xero Shoes), find the hardest and smoothest surface you can find (like a bike path or street) and run.
  2. But only do it for about 200 yards.
  3. See how you feel the next day.
  4. You may be sore, you may be fine. If you’re sore, wait until you’re not. Then go try again, and add 100 or 200 yards. Repeat.

I think of this as the “Shampoo method” of barefoot running. Instead of “Lather, Rinse, Repeat,” it’s run a little, rest, repeat (and run a little more).

Keep in mind, there are two types of soreness. One is from using muscles you haven’t used in a while, or using them in a way you haven’t used in a while (if ever), or using them a bit more than usual.

The other is from doing something wrong. Like doing way too much distance (which part of 200 yards was confusing to you?), or trying to stay on your toes without letting your heels ever touch the ground (Not necessary… land mid- or forefoot, but your heel can touch down. No need to do 200 yards of calf raises).

In other words, a little soreness is probably normal. A lot of soreness is telling you to try something different.

And this idea that you need to be on soft surfaces. Completely wrong. And wrong for the same reason that you don’t want to be in cushy running shoes.

Give yourself a soft surface and the odds are good you’ll heel-strike. Plus, soft surfaces don’t give you the feedback you want, the kind that can help you quickly learn a new and better way to run. I’ve seen barefoot runners who’ve only run on grass, and they usually look like shod runners who lost their shoes.

Instead of thinking that you can work your way to barefoot or huaraches slowly, go there immediately. But work your way up in time/distance slowly.

All the strengthening that you want to do before you run barefoot, you’ll get that faster by running barefoot.

All the stretching you need (if, in fact, you need any), you’ll get that by building up your distance, slowly.

To misquote Yoda’s famous “There is no try. Only do.” There is no transition, only run (or walk, as the case may be).

Oh, and in the next lesson, I’ll share some of the most important tips about exactly HOW to run barefoot, including some suggestions that, frankly, I never wanted to share with anyone… shhhhh.

Let me know what you think. Put in your comments, below.

The content of this post does not constitute and is not intended to be a substitute for professional medical advice, diagnosis or treatment. Always seek the advice of a physician or other qualified health provider with any questions or concerns you may have about your health or a medical condition.